INSTRUCTIONS FOR USE

The fixings are placed on the perimeter about 150 mm from the edge and in the centre of the boards, and the type of plug is chosen depending on the substrate and the thickness of the insulation board.

Surface:
Drill with a 10 mm drill bit through the insulation board and ensure a minimum anchorage depth of 50 mm to the substrate. Insert the dowel into the hole and anchor by tapping by pressing the circular head of the dowel so that it is 1 to 2 mm below the surface of the board.

Insulation:
Taking the hole made as the centre and attaching the appropriate cutting attachment to the drill, a cavity is made inside the insulating plate. The plug is tapped into the cavity and the appropriate insulating plug is then fitted.